Home /Petro Division/ General Test Equipment /Ramsbottom Carbon Residue Apparatus

Ramsbottom Carbon Residue Apparatus

Ramsbottom Carbon Residue Apparatus

Ramsbottom Carbon Residue Apparatus

Test Method
Determines the 'carbon residue' left after evaporation and pyrolysis of a sample oil in the Ramsbottom furnace, providing an indication of the deposit forming tendencies of fuels and guidelines for the processing of refinery products.

Ramsbottom Carbon Residue Apparatus
. Conforms to ASTM D524 and related specifications
. Microprocessor temperature control with digital display and over temperature cut-off. Thermostatically controlled coking furnace for five samples. Cast-iron block type furnace reaches the standard test temperature of 550°C (1022°F) rapidly and controls with 1°C stability. Microprocessor temperature control has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an over temperature control circuit which automatically interrupts power to the unit should block temperature exceed the programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Heavily insulated stainless steel cabinet with three-layer refractory top provides excellent heat retention.

Specifications

Conforms to the specifications of: ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117
Furnace Type: Cast iron block
Capacity: 5 coking bulbs
Maximum Temperature: 650°C (1200°F)
Controller Sensitivity: 1°C ( 2°F)
Heater: 0-2400W, ceramic band heater
Electrical Requirements :115V 60Hz, Single Phase, 20.8A   ;  220-240V 50/60Hz, Single Phase, 10.9A

Dimensions

lxwxh,in.(cm) : 16x21.1/2x14.1/2 (41x55x37)
Net Weight: 64 lbs (29kg)


Shipping Information

Shipping Weight: 78 lbs (35kg)
Dimensions: 8.2 Cu. ft.



REQUEST A QUOTE